diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c
index 90f95df..b68c5dd 100644
--- a/cpu/arm920t/at91rm9200/i2c.c
+++ b/cpu/arm920t/at91rm9200/i2c.c
@@ -120,7 +120,7 @@
 i2c_read (unsigned char chip, unsigned int addr, int alen,
 	  unsigned char *buffer, int len)
 {
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/* we only allow one address byte */
 	if (alen > 1)
 		return 1;
@@ -139,7 +139,7 @@
 i2c_write(unsigned char chip, unsigned int addr, int alen,
 	  unsigned char *buffer, int len)
 {
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	int i;
 	unsigned char *buf;
 
@@ -210,7 +210,7 @@
 
 unsigned int i2c_get_bus_speed(void)
 {
-	return CFG_I2C_SPEED;
+	return CONFIG_SYS_I2C_SPEED;
 }
 
 #endif /* CONFIG_HARD_I2C */
diff --git a/cpu/arm920t/at91rm9200/interrupts.c b/cpu/arm920t/at91rm9200/interrupts.c
index 1054602..5f0703c 100644
--- a/cpu/arm920t/at91rm9200/interrupts.c
+++ b/cpu/arm920t/at91rm9200/interrupts.c
@@ -35,8 +35,8 @@
 #include <asm/arch/hardware.h>
 /*#include <asm/proc/ptrace.h>*/
 
-/* the number of clocks per CFG_HZ */
-#define TIMER_LOAD_VAL (CFG_HZ_CLOCK/CFG_HZ)
+/* the number of clocks per CONFIG_SYS_HZ */
+#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
 
 /* macro to read the 16 bit timer */
 #define READ_TIMER (tmr->TC_CV & 0x0000ffff)
@@ -126,7 +126,7 @@
 	ulong endtime;
 	signed long diff;
 
-	tmo = CFG_HZ_CLOCK / 1000;
+	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
 	tmo *= usec;
 	tmo /= 1000;
 
@@ -155,7 +155,7 @@
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
 
diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S
index 98363eb..66b07da 100644
--- a/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ b/cpu/arm920t/at91rm9200/lowlevel_init.S
@@ -79,7 +79,7 @@
 	/* Get the CKGR Base Address */
 	ldr     r1, =AT91C_BASE_CKGR
 	/* Main oscillator Enable register */
-#ifdef CFG_USE_MAIN_OSCILLATOR
+#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
 	ldr     r0, =0x0000FF01		/* Enable main oscillator,  OSCOUNT = 0xFF */
 #else
 	ldr     r0, =0x0000FF00		/* Disable main oscillator, OSCOUNT = 0xFF */
diff --git a/cpu/arm920t/at91rm9200/spi.c b/cpu/arm920t/at91rm9200/spi.c
index 265d185..f3cb5d8 100644
--- a/cpu/arm920t/at91rm9200/spi.c
+++ b/cpu/arm920t/at91rm9200/spi.c
@@ -137,11 +137,11 @@
 
 	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
 	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
-		((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
+		((timeout = get_timer_masked() ) < CONFIG_SYS_SPI_WRITE_TOUT));
 	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
 	pDesc->state = IDLE;
 
-	if (timeout >= CFG_SPI_WRITE_TOUT){
+	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT){
 		printf("Error Timeout\n\r");
 		return DATAFLASH_ERROR;
 	}
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
index c121de6..72355dc 100644
--- a/cpu/arm920t/at91rm9200/usb.c
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 # ifdef CONFIG_AT91RM9200
 
 #include <asm/arch/hardware.h>
@@ -50,4 +50,4 @@
 }
 
 # endif /* CONFIG_AT91RM9200 */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c
index f93bf57..1b9cde6 100644
--- a/cpu/arm920t/cpu.c
+++ b/cpu/arm920t/cpu.c
@@ -95,7 +95,7 @@
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm920t/imx/interrupts.c b/cpu/arm920t/imx/interrupts.c
index c61d3bc..ddcfb34 100644
--- a/cpu/arm920t/imx/interrupts.c
+++ b/cpu/arm920t/imx/interrupts.c
@@ -112,7 +112,7 @@
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 
 	return tbclk;
 }
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index c9cd066..09c54db 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -42,7 +42,7 @@
 	/* ASSUMED to be a timer interrupt  */
 	/* Just clear it - count handled in */
 	/* integratorap.c                   */
-	*(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0x0C) = 0;
 #else
 #error do_irq() not defined for this cpu type
 #endif
diff --git a/cpu/arm920t/s3c24x0/i2c.c b/cpu/arm920t/s3c24x0/i2c.c
index 374b683..fba5cd1 100644
--- a/cpu/arm920t/s3c24x0/i2c.c
+++ b/cpu/arm920t/s3c24x0/i2c.c
@@ -384,7 +384,7 @@
 		xaddr[3] = addr & 0xFF;
 	}
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -397,7 +397,7 @@
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	if ((ret =
 	     i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
@@ -423,7 +423,7 @@
 		xaddr[2] = (addr >> 8) & 0xFF;
 		xaddr[3] = addr & 0xFF;
 	}
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -436,7 +436,7 @@
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	return (i2c_transfer
 		(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
index 7ad9fcb..11e6804 100644
--- a/cpu/arm920t/s3c24x0/interrupts.c
+++ b/cpu/arm920t/s3c24x0/interrupts.c
@@ -179,7 +179,7 @@
 #elif defined(CONFIG_SBC2410X) || \
       defined(CONFIG_SMDK2410) || \
       defined(CONFIG_VCMA9)
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 #else
 #	error "tbclk not configured"
 #endif
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
index 421ebb4..9ccf575 100644
--- a/cpu/arm920t/s3c24x0/usb.c
+++ b/cpu/arm920t/s3c24x0/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 # if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
 
 #if defined(CONFIG_S3C2400)
@@ -69,4 +69,4 @@
 }
 
 # endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
-#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 5d0fec6..17977c2 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -202,8 +202,8 @@
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -316,8 +316,8 @@
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE)
-	sub	r2, r2, #(CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	ldmia	r2, {r2 - r3}			@ get pc, cpsr
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -350,8 +350,8 @@
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE)
-	sub	r13, r13, #(CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr